China wholesaler a. C. Geared Motors Helical Foot Mounted vacuum pump ac system

Product Description


Company  Profiles

     
-We are a leading gear motor manufacturer
ZHangZhoug Xihu (West Lake) Dis.hai Reducer is a leading manufacturer of gear motor and gearbox.
Since 1991, we have specialized in manufacturing a wide range of gear motor and gear box including:
 

  • helical gear motor
  • helical bevel gear motor
  • parallel shaft helical gear motor
  • helical worm gear motor
  • hoist drive
  • heavy-duty helical gearbox
  • heavy-duty helical bevel gearbox
  • gear motor for car parking system
  • sprial bevel gearbox

Product Description

Product Description

 

D series gear motor is composed with two-stage or three-stage gears. Input shaft and output shaft is inline.

Mounting position: footed mounting, flange mounting, both flange and footed mounting etc.

Thechnical data:

Output speed 10 ~ 800 rpm

Rated output torque 10 ~ 20000 Nm

Motor power 0.12 ~ 200 KW
 

Detailed Photos

Product Show

Product Parameters

Product Specification

Product features
1. D series helical gear motor own rational design, compact construction, smaller size than cycloidal gearmotor at the same permitted torque.
2. Little vibration and low noise, with high transmission efficiency.
3. The products have been mainly used in chemical machinery, cement agitator machinery, printing and packaging machinery, mine and power transmission machinery, metallurgy etc.
General Technical data
Housing material HT250 high-strength cast iron
Housing hardness HBS190-240
Pinion material 20CrMnTiH
Gear material 20CrMnTiH
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input/output shaft material 40CrMnTiH
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~7 Grade
Lubricating oil  L-CKC220  (GB 5903-95) 
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage) 
Noise (MAX) 60~68dB
Temp. rise  (MAX) 40°C 
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China Top brand C&U,LYC,TMB or other brands requested, 
Brand of oil seal CTY— ZheJiang or other brands requested
D —- series helical gear motor
D-series single stages
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Weight
Solid (mm)  (mm) (mm) (kw) (Nm) (KGS)
D37 25k6 90h13 110/160 0.12~3 4~135 210 11
D47 30k6 115h13 110/160 0.12~5.5 4~172 335 16
D57 35k6 115h13 130/200 0.12~7.5 5~188 490 19
D67 35k6 130h13 180/250 0.12~7.5 5~193 570 28
D77 40k6 140h13 230/300 0.18~11 5~197 890 39
D87 50k6 180h13 250/350 0.55~22 5~246 1660 65
D97 60m6 225h13 350/450 0.55~30 5~290 3000 110
D107 70m6 250h13 350/450 1.5~45 2~249 4550 200
D137 90m6 315h13 450/550 3~55 5~220 9270 280
D147 110m6 355h13 450/550 4~90 5~167 14940 430
D167 120m6 425h13 550/660 7.5~160 10~230 20880 650
D series double stages 
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
D27D17 25k6 90h13 95/140 0.12~0.18 90~229 140 6~15
D37D17 25k6 90h13 110/160 0.12~0.25 90~156 225 4.1~14
D47D37 30k6 115h13 110/160 0.12~0.25 154~572 340 2.4~8.5
D57D37 35k6 115h13 130/200 0.12~0.25 142~782 477 1.8~9.2
D67D37 35k6 130h13 180/250 0.12~0.37 158~956 590 1.4~8.2
D77D37 40k6 140h13 230/300 0.12~0.55 186~1430 880 0.97~7.3
D87D57 50k6 180h13 250/350 0.12~1.1 195~2873 1665 0.48~7.2
D97D57 60m6 225h13 350/450 0.12~2.2 209~4678 2930 0.29~6.8
D107D77 70m6 250h13 350/450 0.12~2.2 214~7583 4510 0.18-6.6
D137D77 90m6 315h13 450/550 0.12~4 35.1~12921 9090 0.11~6.3
D147D77 110m6 355h13 450/550 0.12~4 415~21342 14940 0.06~3.4
D147D87 110m6 355h13 450/550 1.5~11 159~533 14940 2.6~9.1
D167D97 120m6 425h13 550/660 1.5~11 279~2333 25710 0.6~5.2
D167D107 120m6 425h13 550/660 11 4.9~8.5 17640 4.9~8.5
Remark: the weight without oil and motor, shaft and flange input add 10%.

 

Company Profile

ZHangZhoug Xihu (West Lake) Dis.hai Reducer Co., LTD is professionally manufacturing gear motor and gear box, with more than 20+years  experience,
And an industrial and trading company have been set up in ZheJiang , known as “ZheJiang Teguosi Transmission Equipment Co., Ltd”, and shorten as ” DHC•TGS”, mainly researching and developing high-quality transmission equipment, providing complete sets of equipment for the global intelligent industry in accordance with European standards, National standards and Enterprise standards. 

Our products had been Certified by CE,CCC,CQC,XT. 
As a leading brand of domestic transmission equipment, it is also a National High-tech Enterprise, a director of the China Heavy Machinery Industry Association, and a Parking Equipment Working Committee and a Bridge Crane Professional Committee. 

Your reliable supplier ,we assure you the utmost reliability and security for both product and services.

Our Advantages

Our Advantages: Your professional supplier with 20+years experience

Widely  Used In  Different Industries (Application)
 


Package

Plastic bag + wooden carton
 

FAQ

FAQ

1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company:  E, D, T, and P series helical gear motor and
hoist   drive
heavy-duty helical gearbox
heavy-duty helical bevel gearbox
gear motor for car parking system
sprial bevel gearbox  
more  than 1 hundred models and thousands of specifications
2.Q: How long is your delivery time?
A:
Generally it is 5-10 days if the parts are in stock. or it is 15-40 days if the parts are not in stock.
3.Q: What is your MOQ?
A:1 Set
4.Q: :Can you make as per custom drawing?
 A:Yes, we offer customized service for customers.

If you have any demand for our products please feel free to contact me. 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Motor, Machinery, Agitator
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Coaxial
Gear Shape: Helical
Step: Three-Step

gear motor

Are gear motors suitable for both heavy-duty industrial applications and smaller-scale uses?

Yes, gear motors are suitable for both heavy-duty industrial applications and smaller-scale uses. Their versatility and ability to provide torque multiplication make them valuable in a wide range of applications. Here’s a detailed explanation of why gear motors are suitable for both types of applications:

1. Heavy-Duty Industrial Applications:

Gear motors are commonly used in heavy-duty industrial applications due to their robustness and ability to handle high loads. Here are the reasons why they are suitable for such applications:

  • Torque Multiplication: Gear motors are designed to provide high torque output, making them ideal for applications that require substantial force to move or operate heavy machinery, conveyors, or equipment.
  • Load Handling: Industrial settings often involve heavy loads and demanding operating conditions. Gear motors, with their ability to handle high loads, are well-suited for tasks such as lifting, pulling, pushing, or driving heavy materials or equipment.
  • Durability: Heavy-duty industrial applications require components that can withstand harsh environments, frequent use, and demanding operating conditions. Gear motors are typically constructed with durable materials and designed to withstand heavy vibrations, shock loads, and temperature variations.
  • Speed Reduction: Many industrial processes require the reduction of motor speed to achieve the desired output speed. Gear motors offer precise speed reduction capabilities through gear ratios, allowing for optimal control and operation of machinery and equipment.

2. Smaller-Scale Uses:

While gear motors excel in heavy-duty industrial applications, they are also suitable for smaller-scale uses across various industries and applications. Here’s why gear motors are well-suited for smaller-scale uses:

  • Compact Size: Gear motors are available in compact sizes, making them suitable for applications with limited space or small-scale machinery, devices, or appliances.
  • Torque and Power Control: Even in smaller-scale applications, there may be a need for torque multiplication or precise power control. Gear motors can provide the necessary torque and power output for tasks such as precise positioning, controlling speed, or driving small loads.
  • Versatility: Gear motors come in various configurations, such as parallel shaft, planetary, or worm gear designs, offering flexibility to match specific requirements. They can be adapted to different applications, including robotics, medical devices, automotive systems, home automation, and more.
  • Efficiency: Gear motors are designed to be efficient, converting the electrical input power into mechanical output power with minimal losses. This efficiency is advantageous for smaller-scale applications where energy conservation and battery life are critical.

Overall, gear motors are highly versatile and suitable for both heavy-duty industrial applications and smaller-scale uses. Their ability to provide torque multiplication, handle high loads, offer precise speed control, and accommodate various sizes and configurations makes them a reliable choice in a wide range of applications. Whether it’s powering large industrial machinery or driving small-scale automation systems, gear motors provide the necessary torque, control, and durability required for efficient operation.

gear motor

How does the voltage and power rating of a gear motor impact its suitability for different tasks?

The voltage and power rating of a gear motor are important factors that influence its suitability for different tasks. These specifications determine the motor’s electrical characteristics and its ability to perform specific tasks effectively. Here’s a detailed explanation of how voltage and power rating impact the suitability of a gear motor for different tasks:

1. Voltage Rating:

The voltage rating of a gear motor refers to the electrical voltage it requires to operate optimally. Here’s how the voltage rating affects suitability:

  • Compatibility with Power Supply: The gear motor’s voltage rating must match the available power supply. Using a motor with a voltage rating that is too high or too low for the power supply can lead to improper operation or damage to the motor.
  • Electrical Safety: Adhering to the specified voltage rating ensures electrical safety. Using a motor with a higher voltage rating than recommended can pose safety hazards, while using a motor with a lower voltage rating may result in inadequate performance.
  • Application Flexibility: Different tasks or applications may have specific voltage requirements. For example, low-voltage gear motors are commonly used in battery-powered devices or applications with low-power requirements, while high-voltage gear motors are suitable for industrial applications or tasks that require higher power output.

2. Power Rating:

The power rating of a gear motor indicates its ability to deliver mechanical power. It is typically specified in units of watts (W) or horsepower (HP). The power rating impacts the suitability of a gear motor in the following ways:

  • Load Capacity: The power rating determines the maximum load that a gear motor can handle. Motors with higher power ratings are capable of driving heavier loads or handling tasks that require more torque.
  • Speed and Torque: The power rating affects the motor’s speed and torque characteristics. Motors with higher power ratings generally offer higher speeds and greater torque output, making them suitable for applications that require faster operation or the ability to overcome higher resistance or loads.
  • Efficiency and Energy Consumption: The power rating is related to the motor’s efficiency and energy consumption. Higher power-rated motors may be more efficient, resulting in lower energy losses and reduced operating costs over time.
  • Thermal Considerations: Motors with higher power ratings may generate more heat during operation. It is crucial to consider the motor’s power rating in relation to its thermal management capabilities to prevent overheating and ensure long-term reliability.

Considerations for Task Suitability:

When selecting a gear motor for a specific task, it is important to consider the following factors in relation to the voltage and power rating:

  • Required Torque and Load: Assess the torque and load requirements of the task to ensure that the gear motor’s power rating is sufficient to handle the expected load without being overloaded.
  • Speed and Precision: Consider the desired speed and precision of the task. Motors with higher power ratings generally offer better speed control and accuracy.
  • Power Supply Availability: Evaluate the availability and compatibility of the power supply with the gear motor’s voltage rating. Ensure that the power supply can provide the required voltage for the motor’s optimal operation.
  • Environmental Factors: Consider any specific environmental factors, such as temperature or humidity, that may impact the gear motor’s performance. Ensure that the motor’s voltage and power ratings are suitable for the intended operating conditions.

In summary, the voltage and power rating of a gear motor have significant implications for its suitability in different tasks. The voltage rating determines compatibility with the power supply and ensures electrical safety, while the power rating influences load capacity, speed, torque, efficiency, and thermal considerations. When choosing a gear motor, it is crucial to carefully evaluate the task requirements and consider the voltage and power rating in relation to factors such as torque, speed, power supply availability, and environmental conditions.

gear motor

Can you explain the advantages of using gear motors in various mechanical systems?

Gear motors offer several advantages when utilized in various mechanical systems. Their unique characteristics make them well-suited for applications that require controlled power transmission, precise speed control, and torque amplification. Here’s a detailed explanation of the advantages of using gear motors:

1. Torque Amplification:

One of the key advantages of gear motors is their ability to amplify torque. By using different gear ratios, gear motors can increase or decrease the output torque from the motor. This torque amplification is crucial in applications that require high torque output, such as lifting heavy loads or operating machinery with high resistance. Gear motors allow for efficient power transmission, enabling the system to handle demanding tasks effectively.

2. Speed Control:

Gear motors provide precise speed control, allowing for accurate and controlled movement in mechanical systems. By selecting the appropriate gear ratio, the rotational speed of the output shaft can be adjusted to match the requirements of the application. This speed control capability ensures that the mechanical system operates at the desired speed, whether it needs to be fast or slow. Gear motors are commonly used in applications such as conveyors, robotics, and automated machinery, where precise speed control is essential.

3. Directional Control:

Another advantage of gear motors is their ability to control the rotational direction of the output shaft. By using different types of gears, such as spur gears, bevel gears, or worm gears, the direction of rotation can be easily changed. This directional control is beneficial in applications that require bidirectional movement, such as in actuators, robotic arms, and conveyors. Gear motors offer reliable and efficient directional control, contributing to the versatility and functionality of mechanical systems.

4. Efficiency and Power Transmission:

Gear motors are known for their high efficiency in power transmission. The gear system helps distribute the load across multiple gears, reducing the strain on individual components and minimizing power losses. This efficient power transmission ensures that the mechanical system operates with optimal energy utilization and minimizes wasted power. Gear motors are designed to provide reliable and consistent power transmission, resulting in improved overall system efficiency.

5. Compact and Space-Saving Design:

Gear motors are compact in size and offer a space-saving solution for mechanical systems. By integrating the motor and gear system into a single unit, gear motors eliminate the need for additional components and reduce the overall footprint of the system. This compact design is especially beneficial in applications with limited space constraints, allowing for more efficient use of available space while still delivering the necessary power and functionality.

6. Durability and Reliability:

Gear motors are designed to be robust and durable, capable of withstanding demanding operating conditions. The gear system helps distribute the load, reducing the stress on individual gears and increasing overall durability. Additionally, gear motors are often constructed with high-quality materials and undergo rigorous testing to ensure reliability and longevity. This makes gear motors well-suited for continuous operation in industrial and commercial applications, where reliability is crucial.

By leveraging the advantages of torque amplification, speed control, directional control, efficiency, compact design, durability, and reliability, gear motors provide a reliable and efficient solution for various mechanical systems. They are widely used in industries such as robotics, automation, manufacturing, automotive, and many others, where precise and controlled mechanical power transmission is essential.

China wholesaler a. C. Geared Motors Helical Foot Mounted   vacuum pump ac system	China wholesaler a. C. Geared Motors Helical Foot Mounted   vacuum pump ac system
editor by CX 2024-04-24

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *