China Hot selling Torque All-Metal Gear 48V-30-400K Series DC Brushless Motor vacuum pump distributors

Product Description

SHN Motors

 

Product Description

 

1). High efficiency
2). Long operating life
3). Low noise
4). Good temperature rise
5). Good balance
6). The most available design for the optimized running.

The characteristics of 3-pole and 4-pole DC servo motors
Voltage range: 24VD-110VDC
Rated power: 50w-3kw
Flange range: 40mm, 60mm, 80mm, 110mm, 130mm
Insulation class: F class
Number of poles: 3 or 4 pairs
High structural reliability
3 times overload capacity based on lower temperature rise
IP65 protection grade
Support incremental encoder, rotary, absolute encoder and other feedback
CE UL certification
Category: Low voltage DC servo motor

G2 DC servo motor
Characteristics of 5-pole DC servomotor
Product characteristics
Voltage range: 24VD-110VDC
Rated power: 50w-1kw
Flange range: 40mm, 60mm, 80mm
Insulation class: F class
Number of poles: 5 pairs
30% off ultra-short body
Optimized structure design, reliable axial positioning
3 times overload capacity based on lower temperature rise
IP65 protection grade
Low torque ripple and slot torque
Support incremental encoder, absolute encoder and other feedback
CE UL certification
Category:

Low voltage DC servo motor

G2 Jizhi series DC permanent magnet synchronous servo motor /G1 DC servo motor has independent intellectual property rights. Using high-performance rare earth permanent magnet material, with low inertia, high power density, super overload capacity, extremely low torque ripple, low noise, beautiful appearance and other outstanding advantages.
Ultra-short body, adapt to harsh environment, high cost performance.
High performance rare earth permanent magnet rotor, high torque, low inertia, good dynamic response.
Three-phase sine wave design with excellent low speed smoothing characteristics.
Class F insulation.
Incremental encoder.
IP54 High protection level, easy and fast cable connection.

2.Related Specifications

series Engine seat number Dc Bus Voltage UDC (V) Model number Rated torque(Nm) Maximum torque(Nm) Rated speed(Rpm) Rated power(W) Rated current(A) Peak current(A) Rotor moment of inertia(kgcm2) Fuselage length(mm)
G2 DC ultra smart ultra short servo motor 60 48 SMS060-57130D10M0NL 0.64 1.28 3EXX 0.64 1.92 3000 200 11 33 115 129
SMH60-3030A6XXX 0.95 2.85 300 15.8 47.4 135 179
36 SMH60-2530C6XXX 0.8 2.4 250 8.9 22.3 110 159
SMH60-4030C6XXX 1.27 3.81 400 14.6 43.8 145 189
48 SMH60-6030D6XXX 1.9 5.7 600 19.2 57.6 160 204
80 48 SMH80-6030D8XXX 1.9 5.7 3000 600 15 45 137 197
SMH80-10030D6XXX 3.18 9.54 1000 25.7 77 167 217
110 48 SMH110-803D8XXX 2.55 7.65 3000 800 22 60 115 158
SMH110-10030D8XXX 3.18 9.54 1000 27 62 115 158
SMH110-12630D8XXX 4 12 1260 32 96 168 228
SMH110-10520D8XXX 5 15 2000 1050 33.3 83.3 185 245
130 48 SMH130-15715D8XXX 10 25 1500 1570 39.2 98 213 264
SMH130-20920D8XXX 10 25 2000 2090 55 137.5 219 280

series Engine seat number Dc Bus Voltage
UDC(V)
Model number Rated torque(Nm) Maximum torque(Nm) Rated speed(Rpm) Rated powe(W) Rated current(A) Peak current(A) Rotor moment of inertia(kgcm²) Fuselage length(mm)
N B
G2 40 48 SMH40-530D10xxL 0.16 0.32 3000 50 1.5 4.1 0.018 74.6 114.6
40 48 SMH40-1030D10xxL 0.32 0.96 100 3.2 11.7 0.033 96.6 136.6
60 48 SMH60-2030D10xxL 0.64 1.92 200 5.7 22 0.14 75 122
60 48 SMH60-4030D10xxL 1.27 3.81 400 10.6 41 0.26 97 144
60 48 SMH60-6030D10xxL 1.91 5.73 600 16.5 53 0.403 132.5 177
80 48 SMH80-4030D10xxL 1.27 3.81 400 10.5 33 0.63 88.7 132
80 48 SMH80-6030D10xxL 1.9 5.7 600 15.7 50.5 0.87 99.7 143
80 48 SMH80-7530D10xxL 2.39 7.17 750 19.9 63.8 1.571 106.7 150
80 48 SMH80-10030D10xxL 3.18 9.57 1000 26.4 84.5 1.43 122.7 166

Model number K60BL30 K60BL15 K60BL30 K60BL60 K60BL60 K80BL60 K80BL60 K80BL80 K80BL80 K110BL68 K110BL68 K110BL85 K110BL100 K110BL100
-36V-30-180 -36V-30-94 -48V-144-211 -36V-30-360 -48V-30-400 -48V-30-650 -310V-30-750 -48V-30-840 -310V-30-1000 -310V-30-1260 -160V-30-1260 -310V-30-1570 -310V-30-1880 -150V-20-1260
Number of poles 8
Phase number 3
  VDC 36 36 48 36 48 48 310 48 310 310 160 310 310 150
Rated voltage  Pn(W) 180 94 211 360 400 690 750 840 1000 1260 1260 1570 1880 1260
Rated torque Tn(Nm) 0.57 0.3 0.14 1.15 1.27 2.07 2.4 2.67 3.18 4 5 6
Rated revolution nn(rpm) 3000 3000 14400 3000 3000 3200 3000 3000 3000 3000 3000 3000 3000 2000
 Rated current In(A) 6.7 3.6 8.3 13.6 11.4 18 3 23 4.1 5.4 12.8 6.75 8.2 10.2
Peak current Ip(A) 20.1 10.8 24.9 40.8 34.2 54 9 69 12.3 16.2 38.4 20.25 24.6 30.6
Peak torque Tp (Nm) 1.71 0.9 0.42 3.45 3.81 6.21 7.2 8.01 9.54 12 12 15 18 18
Moment of inertiaJm (Kg·cm²) 0.375 0.255 0.375 0.51 0.51 1.36 1.36 1.9 1.9 5.8 7.2 8.5
Motor length(mm) 100 85 100 130 130 127 127 147 147 154 171 188

3.Outlines/Drawings

 

Our Advantages

4.About US

5.Main Products

6.Package and Shipping

1.FedEX / DHL / UPS / TNT for samples,Door to door service;
2.By sea for batch goods;
3.Customs specifying freight forwarders or negotiable shipping methods;
4.Delivery Time:20-25 Days for samples;30-35 Days for batch goods;
5.Payment Terms:T/T,L/C at sight,D/P etc.

7.FAQ
Q1. When can I get the quotation?
We usually quote within 24 hours after we get your inquiry.
If you are urgent to get the price, please send the message on  and  or call us directly.

Q2. How can I get a sample to check your quality?
After price confirmed, you can requiry for samples to check quality.
If you need the samples, we will charge for the sample cost.
But the sample cost can be refundable when your quantity of first order is above the MOQ

Q3. Can you do OEM for us?
Yes, the product packing can be designed as you want.

Q4. How about MOQ?
1 pcs for carton box.

Q5. What is your main market?
Eastern Europe, Southeast Asia, South America.
 
Please feel  free to contact us if you have any question.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Universal, Industrial, Household Appliances, Car, Power Tools
Operating Speed: Adjust Speed
Excitation Mode: Excited
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gear motor

Can gear motors be used in robotics, and if so, what are some notable applications?

Yes, gear motors are widely used in robotics due to their ability to provide torque, precise control, and compact size. They play a crucial role in various robotic applications, enabling the movement, manipulation, and control of robotic systems. Here are some notable applications of gear motors in robotics:

1. Robotic Arm Manipulation:

Gear motors are commonly used in robotic arms to provide precise and controlled movement. They enable the articulation of the arm’s joints, allowing the robot to reach different positions and orientations. Gear motors with high torque capabilities are essential for lifting, rotating, and manipulating objects with varying weights and sizes.

2. Mobile Robots:

Gear motors are employed in mobile robots, including wheeled robots and legged robots, to drive their locomotion. They provide the necessary torque and control for the robot to move, turn, and navigate in different environments. Gear motors with appropriate gear ratios ensure the robot’s mobility, stability, and maneuverability.

3. Robotic Grippers and End Effectors:

Gear motors are used in robotic grippers and end effectors to control the opening, closing, and gripping force. By integrating gear motors into the gripper mechanism, robots can grasp and manipulate objects of various shapes, sizes, and weights. The gear motors enable precise control over the gripping action, allowing the robot to handle delicate or fragile objects with care.

4. Autonomous Drones and UAVs:

Gear motors are utilized in the propulsion systems of autonomous drones and unmanned aerial vehicles (UAVs). They drive the propellers or rotors, providing the necessary thrust and control for the drone’s flight. Gear motors with high power-to-weight ratios, efficient energy conversion, and precise speed control are crucial for achieving stable and maneuverable flight in drones.

5. Humanoid Robots:

Gear motors are integral to the movement and functionality of humanoid robots. They are used in robotic joints, such as hips, knees, and shoulders, to enable human-like movements. Gear motors with appropriate torque and speed capabilities allow humanoid robots to walk, run, climb stairs, and perform complex motions resembling human actions.

6. Robotic Exoskeletons:

Gear motors play a vital role in robotic exoskeletons, which are wearable robotic devices designed to augment human strength and assist in physical tasks. Gear motors are used in the exoskeleton’s joints and actuators, providing the necessary torque and control to enhance human abilities. They enable users to perform tasks with reduced effort, assist in rehabilitation, or provide support in physically demanding environments.

These are just a few notable applications of gear motors in robotics. Their versatility, torque capabilities, precise control, and compact size make them indispensable components in various robotic systems. Gear motors enable robots to perform complex tasks, move with agility, interact with the environment, and assist humans in a wide range of applications, from industrial automation to healthcare and exploration.

gear motor

How does the voltage and power rating of a gear motor impact its suitability for different tasks?

The voltage and power rating of a gear motor are important factors that influence its suitability for different tasks. These specifications determine the motor’s electrical characteristics and its ability to perform specific tasks effectively. Here’s a detailed explanation of how voltage and power rating impact the suitability of a gear motor for different tasks:

1. Voltage Rating:

The voltage rating of a gear motor refers to the electrical voltage it requires to operate optimally. Here’s how the voltage rating affects suitability:

  • Compatibility with Power Supply: The gear motor’s voltage rating must match the available power supply. Using a motor with a voltage rating that is too high or too low for the power supply can lead to improper operation or damage to the motor.
  • Electrical Safety: Adhering to the specified voltage rating ensures electrical safety. Using a motor with a higher voltage rating than recommended can pose safety hazards, while using a motor with a lower voltage rating may result in inadequate performance.
  • Application Flexibility: Different tasks or applications may have specific voltage requirements. For example, low-voltage gear motors are commonly used in battery-powered devices or applications with low-power requirements, while high-voltage gear motors are suitable for industrial applications or tasks that require higher power output.

2. Power Rating:

The power rating of a gear motor indicates its ability to deliver mechanical power. It is typically specified in units of watts (W) or horsepower (HP). The power rating impacts the suitability of a gear motor in the following ways:

  • Load Capacity: The power rating determines the maximum load that a gear motor can handle. Motors with higher power ratings are capable of driving heavier loads or handling tasks that require more torque.
  • Speed and Torque: The power rating affects the motor’s speed and torque characteristics. Motors with higher power ratings generally offer higher speeds and greater torque output, making them suitable for applications that require faster operation or the ability to overcome higher resistance or loads.
  • Efficiency and Energy Consumption: The power rating is related to the motor’s efficiency and energy consumption. Higher power-rated motors may be more efficient, resulting in lower energy losses and reduced operating costs over time.
  • Thermal Considerations: Motors with higher power ratings may generate more heat during operation. It is crucial to consider the motor’s power rating in relation to its thermal management capabilities to prevent overheating and ensure long-term reliability.

Considerations for Task Suitability:

When selecting a gear motor for a specific task, it is important to consider the following factors in relation to the voltage and power rating:

  • Required Torque and Load: Assess the torque and load requirements of the task to ensure that the gear motor’s power rating is sufficient to handle the expected load without being overloaded.
  • Speed and Precision: Consider the desired speed and precision of the task. Motors with higher power ratings generally offer better speed control and accuracy.
  • Power Supply Availability: Evaluate the availability and compatibility of the power supply with the gear motor’s voltage rating. Ensure that the power supply can provide the required voltage for the motor’s optimal operation.
  • Environmental Factors: Consider any specific environmental factors, such as temperature or humidity, that may impact the gear motor’s performance. Ensure that the motor’s voltage and power ratings are suitable for the intended operating conditions.

In summary, the voltage and power rating of a gear motor have significant implications for its suitability in different tasks. The voltage rating determines compatibility with the power supply and ensures electrical safety, while the power rating influences load capacity, speed, torque, efficiency, and thermal considerations. When choosing a gear motor, it is crucial to carefully evaluate the task requirements and consider the voltage and power rating in relation to factors such as torque, speed, power supply availability, and environmental conditions.

gear motor

How does the gearing mechanism in a gear motor contribute to torque and speed control?

The gearing mechanism in a gear motor plays a crucial role in controlling torque and speed. By utilizing different gear ratios and configurations, the gearing mechanism allows for precise manipulation of these parameters. Here’s a detailed explanation of how the gearing mechanism contributes to torque and speed control in a gear motor:

The gearing mechanism consists of multiple gears with varying sizes, tooth configurations, and arrangements. Each gear in the system engages with another gear, creating a mechanical connection. When the motor rotates, it drives the rotation of the first gear, which then transfers the motion to subsequent gears, ultimately resulting in the output shaft’s rotation.

Torque Control:

The gearing mechanism in a gear motor enables torque control through the principle of mechanical advantage. The gear system utilizes gears with different numbers of teeth, known as gear ratio, to adjust the torque output. When a smaller gear (pinion) engages with a larger gear (gear), the pinion rotates faster than the gear but exerts more force or torque. This results in torque amplification, allowing the gear motor to deliver higher torque at the output shaft while reducing the rotational speed. Conversely, if a larger gear engages with a smaller gear, torque reduction occurs, resulting in higher rotational speed at the output shaft.

By selecting the appropriate gear ratio, the gearing mechanism effectively adjusts the torque output of the gear motor to match the requirements of the application. This torque control capability is essential in applications that demand high torque for heavy lifting or overcoming resistance, as well as applications that require lower torque but higher rotational speed.

Speed Control:

The gearing mechanism also contributes to speed control in a gear motor. The gear ratio determines the relationship between the rotational speed of the input shaft (driven by the motor) and the output shaft. When a gear motor has a higher gear ratio (more teeth on the driven gear compared to the driving gear), it reduces the output speed while increasing the torque. Conversely, a lower gear ratio increases the output speed while reducing the torque.

By choosing the appropriate gear ratio, the gearing mechanism allows for precise speed control in a gear motor. This is particularly useful in applications that require specific speed ranges or variations, such as conveyor systems, robotic movements, or machinery that needs to operate at different speeds for different tasks. The speed control capability of the gearing mechanism enables the gear motor to match the desired speed requirements of the application accurately.

In summary, the gearing mechanism in a gear motor contributes to torque and speed control by utilizing different gear ratios and configurations. It enables torque amplification or reduction, depending on the gear arrangement, allowing the gear motor to deliver the required torque output. Additionally, the gear ratio also determines the relationship between the rotational speed of the input and output shafts, providing precise speed control. These torque and speed control capabilities make gear motors versatile and suitable for a wide range of applications in various industries.

China Hot selling Torque All-Metal Gear 48V-30-400K Series DC Brushless Motor   vacuum pump distributorsChina Hot selling Torque All-Metal Gear 48V-30-400K Series DC Brushless Motor   vacuum pump distributors
editor by CX 2024-04-03

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *